Infrared / Hyperspectral Imaging

Telops HDR M700

HIGH DYNAMIC RANGE INFRARED CAMERA

The HDR M700 represents a revolution in high dynamic range infrared imaging. Traditional midwave infrared cameras can effectively measure a span of about 150 degrees with a single exposure time before experiencing image saturation. Telops HDR M700 utilizes an advanced on-chip saturation management solution to extend the single-exposure time dynamic range to a span of over 900 degrees enabling analysis of scenes and objects exhibiting strong thermal contrast.

Download Datasheet

Technical Specifications

Parameter	Typical Range
Detector Type	Cooled SLS (Strained Layer Superlattice)
Detector Format	640 x 512 pixels
Spectral Range	3.0–5.0 µm (MWIR)
Aperture	F/4
Single-Exposure Dynamic Range	Over 900°C
NETD	~20 mK
Ingress Protection	IP67
Operating Temperature	-15°C to +50°C

Key Specifications

•Detector: cooled SLS (Strained Layer Superlattice), 640 x 512 pixels
•Spectral range: 3.0–5.0 µm (MWIR)
•Aperture: F/4
•Single-exposure dynamic range: over 900°C
•NETD: approximately 20 mK
•Ingress protection: IP67
•Operating temperature: -15°C to +50°C

Key Features

•Advanced on-chip saturation management for 900°C single-exposure dynamic range
•Extends traditional ~150°C MWIR dynamic range to over 900°C
•Enables analysis of scenes with extreme thermal contrast
•IP67 environmental protection for field use
•High thermal sensitivity (~20 mK NETD)

Software & Integration

•RevealIR

Applications

•High-contrast thermal scene analysis
•Pyrotechnics and explosives testing
•Jet engine and combustion research
•Industrial processes with extreme temperature differentials

Related Products

All Telops products →

Telops

Infrared / Hyperspectral Imaging

MS M3K

The Telops MS M3K is a high-speed multispectral mid-wave infrared (MWIR) camera. An 8-position fast-rotating filter wheel splits the scene into up to eight spectral bands for spectral-signature analysis, instead of a single broadband image. Built on a 320 x 256 InSb detector over the 1.5–5.4 um band, it reaches up to 3,100 fps full-frame and 100,000 fps in subwindow mode, with the wheel spinning up to 100 Hz per filter (up to 800 fps in synchronised mode). Ideal for combustion analysis, gas detection and other applications where material identity matters as much as temperature.

View Details

Telops

Infrared / Hyperspectral Imaging

Fast M3K

The Telops FAST M3K is a high-speed mid-wave infrared (MWIR) camera built to capture the fastest thermal events. Its cooled 320 x 256 InSb detector delivers fully radiometric imaging at up to 3,100 frames per second in full-frame mode and over 100,000 fps in subwindow mode across the 1.5–5.4 um MWIR band. With high thermal sensitivity (~25 mK), advanced factory calibration and proprietary automated exposure control (AEC), the FAST M3K produces accurate, high-fidelity temperature data even on the most challenging fast-moving targets — making it ideal for ballistics, combustion, experimental mechanics, materials testing and aerospace research.

View Details

Telops

Infrared / Hyperspectral Imaging

Fast M350

The M350 is a cooled, high-performance scientific thermal infrared camera designed to provide excellent image quality and impressive thermal sensitivity. It features our unique real-time calibration and is an excellent choice for a variety of scientific and industrial applications.

View Details

Telops

Infrared / Hyperspectral Imaging

SWIR

SHORT WAVE INFRARED CAMERAS. The FAST- SWIR camera line is the fastest infrared camera line available in the SWIR band. Ideal for analyzing dynamic events, the FAST- SWIR infrared cameras are also highly sensitive, thanks to their unique low noise detector.

View Details